#MINI VCI DRIVER DOWNLOAD HOW TO#
#MINI VCI DRIVER DOWNLOAD INSTALL#
#MINI VCI DRIVER DOWNLOAD 64 BIT#
#MINI VCI DRIVER DOWNLOAD SERIAL#
#MINI VCI DRIVER DOWNLOAD 32 BIT#

For future Techstream users, here are the instructions I used to get the software connected to my vehicle for the 64 bit application: TIS Techstream V10 Setup Instruction (!!! For 64 bit system!!!Ĭopy ” Program Files (x86) ” folder to drive C:, tick ” replace all current items ” 2. Since I am expecting to use Techstream quite a bit, I thought I would start a thread. Installation was not plug and play, but it is quite doable. Just received cable last night and installed the software on my 64 bit computer. This may work for also, with the same software Techstream. Also noticed that Win10 put in its own driver for the which seemed to work just fine with the program.

#MINI VCI DRIVER DOWNLOAD 32 BIT#

Yesterday, I found some tested TIS on Win10 X64! Then tested this version on my wife’s Corolla using 32 bit Windows 10 just to see if it would work. It defaults to metric, and it also defaults to absolute for the TPMS so at first you’ll be scratching your head at the 46psi tire pressure set that one to “gauge” There is no need to launch anything in XP compatibility or anything (at least not on my Windows 8.1 system) PS.

For the user and all other blank mandatory fields, I just typed in “111” and left the default “Albania” Next, select VIM type xHorse Now, you’ll want to set your preferences for units. The key thing is that only the “Europe” option works. Upon loading, you’ll need to select “Europe” and then your preferred language. One.ini file needs to be edited to “activate” the program. Again, follow the directions on installation.

#MINI VCI DRIVER DOWNLOAD INSTALL#

Mine downloaded as mvci-圆4.reg.txt (might be a Dropbox restriction), simply rename to mvci-圆4.reg After renaming the registry hack file you then need to run the file, which will merge the contents with the registry (will probably get a Windows modification confirmation) Once the driver was loaded and I verified with the firmware update utility that it was communicating (don’t try to update the firmware), I was ready to install and run Techstream. After installing the driver, you need to run the registry hack. On my 8.1 installation, when I plugged in the TIS cable, Windows automatically looked for and installed the driver, so if you haven’t followed the instructions to that point, it will load the 32 bit driver. Get the latest Techstream from: There are a number of steps to getting the driver installed manually, be sure to follow ALL of them before plugging the cable in.

Found this last week, had a tried, and it worked wonderfully on my Asus Windows 8.1 Intel i3 notebook: The thread includes a dropbox link where you can download “all” of the needed files, but really all you need from there is the MVCI driver and the.reg registry hack file. My little daughter are always annoyed with that. Recently, wanted to shut off the passenger side seatbelt warning. Download the 'Toyota Techstream Installation Manual - Windows 10.pdf.Įspecially download Windows XP system for (suggested by technicians), just to shut off the DRL’S.

Mini Vci J2534 Driver Download Windows 7Ī couple years ago, I bought the MINI-VCI adapter with drivers.

Mini Vci J2534 Driver Download Download.

Mini Vci J2534 Driver Download Windows 10.

Go to Setup->VIM Selection->Select interface as MVCI Autokent-X64 1.4. If techstream asks for an activation/registration key, press Cancel to exit

#MINI VCI DRIVER DOWNLOAD SERIAL#

Go to Device Manager->Other Devices->USB Serial Port->Update Driver Softwareīrowse for driver software on destination folder C:/Program Files(x86)/Autokent MVCI MultiDriver X64/1.4.8Įnter Repair Name, Code and Phone all with number “1” and press OK Windows successfully updated your driver software Go to Device Manager->Other Devices-M-VCI->Update Driver Softwareīrowse for driver software on destination folder you saved previously Successfully installed the driver version 1.4.8 Select firmware version 1.4.8 and Install Run MVCI MultiDriverX64 on deskotp as Administrator Open driver folder and extact Driver MVCI. Install MVCI driver for 32bit or 64bit system, here we install driver for 64bit Open Techstream V16.00.017 folder, run Techstream_Setup_V16.00.017Įnter user name: 123 and Company name: 567, press Next to continue

#MINI VCI DRIVER DOWNLOAD HOW TO#

How to Install Toyota Techsteam V16.00.017 on Win10 (64bit)?Ĭopy and paste Techstream V16.00.017 and driver folder to desktop Supported language: English, German, French, Spanish, Italian, Russian, Chinese, Turkish etc Here comes the Version Of Toyota Techstream V16.00.017 for 1996-2022 for Toyota, Lexus and Scion including American LHD and UK RHD cars and including all CANBU / CAN BUS based. Free Download and Install Mini VCI Toyota Techstream 16.00.017

Mini vci driver download